Supporting Devices of TDI Project of Yantai Juli Fine Chemical Co., Ltd.




TDI Project of Yantai Juli Fine Chemical Co., Ltd. purifies CO and H2 from the water gas to synthesize TDI (toluene diisocyanate). Since the project generates the gas by the fixed bed, the generated raw material gas and nitrogen contain much methane, which makes the PSA purification of CO and H2 more difficult. The user formerly adopted the PSA-CO/H2 device of another manufacturer, whose designed CO productivity is 1,000Nm3/h but the actual productivity is only 400-500Nm3/h, and the content of methane and nitrogen in the CO product largely exceeds the upper limit, thus resulting in great economic losses.

PIONEER makes improvements to the PSA device, after which, the productivity is elevated by over 50% to 1500Nm3/h, various indexes meet the design requirement, the user's production demand is fulfilled and the comprehensive benefit of the enterprise is significant increased. Several times of production expansion of the enterprise adopt our products.

Comments

Post a Comment

Popular posts from this blog

PSA Oxygen Technology

Image
PSA oxygen technology  is one of the air separating technology for oxygen booming in recent ten years. Compared with traditional cryogenic technology, PSA oxygen technology is known for its low investment, low consumption, low operation-maintenance fee, mild process conditions, simple process flow, high automation, high operation flexibility, short construction duration, and safe performance. Up to now, PSA oxygen technology can replace cryogenic in many circumstances, and the PSA oxygen technology is more economic than cryogenic in running. The main components of air are nitrogen and oxygen, so oxygen can be generated through a selective adsorbent which can separate oxygen from nitrogen in a suitable operation condition. In a pressurized condition, when air flows through adsorption beds with zeolites, nitrogen will be largely adsorbed, while little oxygen will be adsorbed, thus oxygen get enriched. When adsorbent is close to saturation, air will be stopped feeding into the bed,
Read more

Iron and Steel

Image
PIONEER has accumulated extensive experience in VPSA oxygen production technology over the course of 18 years and has served more than 30 large iron and steel companies, including overseas iron and steel companies such as India's JSW and The Philippines Meilian Steel. PIONEER provides advanced gas separation technologies for iron and steel companies to help them save energy and improve efficiency and has an extremely high level of brand awareness in the Chinese iron and steel industry. PIONEER's proprietary technologies serve the iron and steel sector in the following areas: 1. VPSA oxygen production technology ( VPSA-O2 ) A. Oxygen-enriched combustion in ironmaking blast furnaces: PSA oxygen production technology can provide stable and high quality oxygen products for blast furnace ironmaking. B. Oxygen-enriched combustion for EAF steelmaking: oxygen can be obtained using PSA technology. 2. PSA CO purification technology (PSA-CO) A. Recycling blast furnace gas: PIO
Read more

Blast-furnace Oxygen-enriched Iron Manufacturing and Oxygen Generation Project of Wugang

Image
The flow of the  VPSA-O2 device  provided by PIONEER to Wugang Sino-Canada Steel Co., Ltd. is 10,600Nm3/h and the purity is 80%. It is applied to the oxygen-enriched combustion of the Blast Furnace #1 (1,260m3) of Sino-Canada Steel. The blast-furnace oxygen enrichment technology has been commonly recognized by the industry as an effective way to reduce the production cost and elevate the economic benefit. It is analyzed by the expert that when the oxygen enrichment rate of the blast furnace reaches 2.5%, a ton of iron may save 40kg of coke and the annual output of steel may increase by over 90,000 tons. The  VPSA-O2 device  manufactured by the company is energy-saving and flexible in operation that it may assist the user in reducing the cost and strengthen the efficiency.
Read more