Nonferrous Metallurgy


It is an important technical measure to increase the productivity, reduce the energy consumption, control the environmental pollution, improve the technology of metallurgy and increase the economic benefit by replacing the ordinary air with the oxygen-rich air in nonferrous metallurgy. The VPSA-O2 technology of PIONEER may provide the metallurgy of non-ferrous metals such as copper, lead, nickel, zinc, tin and gold with the stable and reliable oxygen source to optimize the energy saving of oxygen-rich combustion technique, largely reduce the oxygen cost and obtain the significant comprehensive benefit.

The non-ferrous metallurgy of copper, lead, nickel, zinc, tin and gold, etc. mainly adopts the oxygen-rich air whose concentration is between 24% and 90% and the productivity of the oxygen generating device is generally under 3,000Nm3/h. This is the best parameter range for the PSA device and large-scale oxygen generating device may adopt the combination of several sets.

PIONEER has occupied the vast majority of market share of VPSA oxygen generation in China's nonferrous metallurgical industry. It has constructed more than 30 sets of oxygen generating devices for the nonferrous metallurgical industry, including over 10 sets with productivity exceeding 10,000Nm3/h. With rich performance, PIONEER has become the preferred VPSA-O2 technology supplier in the nonferrous metallurgical industry.

Comments

Post a Comment

Popular posts from this blog

Supporting Devices of 200,000 t/y Glycol Project of Tongliao GEM Chemical Co., Ltd.

Image
The 200,000 t/y glycol project of Tongliao GEM is the first new-type coal chemical project of China that produces glycol by the brown coal. It is a high-tech project promoted by the government and has been put into operation in 2010. PIONEER provides the 22,000Nm3/h CO device of  PSA purification , 42,000Nm3/h H2device of PSA purification and 20,000Nm3/h VPSA-O2 device to the project. These three sets of large-scale PSA devices have been stably operating since the start and indexes of the product gas meet the design requirement. It provides the 200,000 t/y glycol project of Tongliao GEM with stable and low-cost gas source to create favorable economic benefits to the customer.
Read more

PSA Oxygen Technology

Image
PSA oxygen technology  is one of the air separating technology for oxygen booming in recent ten years. Compared with traditional cryogenic technology, PSA oxygen technology is known for its low investment, low consumption, low operation-maintenance fee, mild process conditions, simple process flow, high automation, high operation flexibility, short construction duration, and safe performance. Up to now, PSA oxygen technology can replace cryogenic in many circumstances, and the PSA oxygen technology is more economic than cryogenic in running. The main components of air are nitrogen and oxygen, so oxygen can be generated through a selective adsorbent which can separate oxygen from nitrogen in a suitable operation condition. In a pressurized condition, when air flows through adsorption beds with zeolites, nitrogen will be largely adsorbed, while little oxygen will be adsorbed, thus oxygen get enriched. When adsorbent is close to saturation, air will be stopped feeding into the bed,
Read more

PHOSPHORUS OFF-GAS PURIFICATION

Image
The content of CO in the yellow phosphorus tail gas  reaches up to 90%. Yellow phosphorus tails gas belongs to the ore smelting tail gas whose components are complicated and impurities are various. The existence of phosphorus and sulfur in the tail gas utilization may corrode the equipment and shorten the life of the catalyst, so the utilization rate is quite low. The yellow phosphorus resource is abundant in China and deposit reaches 800-1000 thousand tons, which weighs 80% in the world. In absence of the efficiency and advanced purification technique and utilization mode, the yellow phosphorus plant only burns little tail gas to dry the raw material or for the boiler combustion but most of the tail gas is discharged, thus greatly wasting the resource, intensifying the environmental pollution and obstructing the energy saving and emission reduction. Besides, the resource utilization of C1 chemical products requires deep purification of the impurity in the raw gas, but impuriti
Read more