Glass and Glass Fiber



Total-oxygen combustion smelting technology of the glass industry replaces the air by 90%-93% of oxygen in the gas combustion of heavy oil, coal tar, natural gas and coal convertor in the glass furnace. Total-oxygen combustion is advantageous in reducing the emission of smoke and nitrogen oxide in the smoke and saving the energy. Without considering the energy consumption of oxygen generation, it is generally recognized that the total-oxygen combustion may save over 30% of fuel than the ordinary air combustion.

PIONEER’s VPSA-O2 technology can be used to provide oxygen generating devices for the total-oxygen (oxygen-rich) combustion section of glass kilns, with the advantages of oxygen purity of 93% or above, stable oxygen production and flexible load adjustment. Up to now, PIONEER has built more than 20 sets of VPSA-O2 devices for the glass and glass fiber industry, including several oxygen generation projects exported to Bahrain and other countries.

Comments

Post a Comment

Popular posts from this blog

PSA-H2 PLANT

Image
Using the independently-developed and high-efficiency PSA-H2 adsorbent, PIONEER's rapid, low consumption and high-efficiency PSA-H2 process has the following features, low investment and operating cost, high purity and recovery of gas product, flexibility of feed gas and easy load regulation. PSA   H 2 P urification U nit PIONEER's Rapid PSA-H2 technology can purify H2 from shift gas, coke oven gas, semiwater gas, methanol purge gas, methanol pyrolysis gas, ammonia pyrolysis gas, formaldehyde exhaust, refinery reformed gas, refinery FCC dry g as and refined gas. Technical Advantages  of PSA-H2 PLANT 1.  Innovative process design PIONEER’s innovative rapid PSA-H2 process  solves the problem of existing PSA hydrogen separation process, such as high investment, long term, large scale, which improves the using efficiency, and reduces the investment and operating cost. 2.  I ndependently-developed adsorbent PIONEER’s independently-develope...
Read more

The Combustion Economy of Purifying CO from Blast Furnace Gas by Pressure Swing Adsorption

Image
Abstract:  Owning to its low calorific value and combustion efficiency, a lot of blast furnace gas (BFG) is wasted in China. In this paper, pressure swing adsorption (PSA) technology was applied to purify BFG, which can improve the calorific value and combustion efficiency significantly. The technical feasibility, combustion efficiency and engineering economy analysis showed that BFG purified by PSA was the most effective way for energy saving and had a broad application prospect. Key words:  Blast Furnace Gas , Pressure swing adsorption, combustion economy. 1. Introduction Blast Furnace Gas (BFG) is a byproduct of blast furnace ironmaking process, and its emission occupies the highest proportion in the by-product gas of the steel industry. It consists primarily of N2, CO, CO2, H2, CH4, etc., with the specific composition as shown in Table 1. Because the calorific value of blast furnace gas is generally only about 3,000-3,800 kJ/Nm3, it cannot meet the requirement of ind...
Read more

Supporting Devices of 200,000 t/y Glycol Project of Tongliao GEM Chemical Co., Ltd.

Image
The 200,000 t/y glycol project of Tongliao GEM is the first new-type coal chemical project of China that produces glycol by the brown coal. It is a high-tech project promoted by the government and has been put into operation in 2010. PIONEER provides the 22,000Nm3/h CO device of  PSA purification , 42,000Nm3/h H2device of PSA purification and 20,000Nm3/h VPSA-O2 device to the project. These three sets of large-scale PSA devices have been stably operating since the start and indexes of the product gas meet the design requirement. It provides the 200,000 t/y glycol project of Tongliao GEM with stable and low-cost gas source to create favorable economic benefits to the customer.
Read more