OIL& GAS RECOVERY



Oil and gas refers to a combustible, explosive and poisonous gas mixture that is comprised of various volatile hydrocarbon components letting out through evaporative emission in the process of handling and storage of diversified oil products. If discharged directly, oil gas will not only pollute the environment, but also incur direct economic losses to enterprises, and might pose serious threat to the public security as well. Though oil and gas is combustible, explosive and poisonous, yet it has certain economic value. If recycled in a proper manner, 2-3 yuan will be made from per cubic meter of oil and gas. The investment in the oil and gas recovery equipment will be returned in one to two years. Thus, proper oil and gas recovery will increase an enterprise’s benefits, be critically important for the long-term, safe operation of the enterprise, and have a far-reaching significance for both the society and the environment.

Ultra-clean oil and gas recovery technology is a new breed international leading technology developed independently by PIONEER. In comparison with previous technologies, the oil and gas recovery rate is higher, unit energy consumption is less, and it is safer for the long-term operation. It completely meets the rigid requirements of the new national standard —GB 31570-2015 Emission Standard of Pollutants for Petroleum Refining Industry.

Occasions to be Applied
1. The lift truck platforms of oil products and chemicals
2. Warehouses of crude oil, oil products and chemicals
3. Wharfs of crude oil, oil products and chemicals

Variety of oil and gas to be recovered

1. Volatile gas from oil products like gasoline, diesel, and aviation kerosene, etc.
2. Toxic and harmful aromatic gases like benzene, methylbenzene, xylene, etc.
3. Water-soluble, toxic and harmful gases like methanol and alcohols, ketones and aldehydes
4. Other volatile organic gases

Occasions to be Applied
1. The lift truck platforms of oil products and chemicals
2. Warehouses of crude oil, oil products and chemicals
3. Wharfs of crude oil, oil products and chemicals

Variety of oil and gas to be recovered

1. Volatile gas from oil products like gasoline, diesel, and aviation kerosene, etc.
2. Toxic and harmful aromatic gases like benzene, methylbenzene, xylene, etc.
3. Water-soluble, toxic and harmful gases like methanol and alcohols, ketones and aldehydes
4. Other volatile organic gases

Technical Feature of oil and gas recovery

1. Oil and gas handling capacity of a single unit: 100-6000 Nm3/h
2. Discharge of non-methane total hydrocarbon of the oil and gas recovery device ≤80 mg/m3 (Chinese standard≤120 mg/m3)
3. Oil and gas recovery≥99.9%
4. Energy consumption of oil and gas processing≤0.15 kWh/Nm3
5. Adopt dedicated absorbent, service life: 10 years
6. Overall anti-hazard classification of the device: Ex demb ibⅡBT4
7. Fully automatic, unattended operation, support online remote monitoring
8. Modular design, skid-mounted as a whole, small occupation of land, easy and convenient for installation

Cooperation Model
1. Diagnose oil and gas emission, and provide advice about recovery technology
2. Technology upgrading and reconstruction of old oil and gas recovery equipment
3. Supply new oil and gas recovery equipment in full sets
4. Cooperate in the marketing channels of oil and gas recovery equipment 

Comments

Post a Comment

Popular posts from this blog

PSA Oxygen Technology

Image
PSA oxygen technology  is one of the air separating technology for oxygen booming in recent ten years. Compared with traditional cryogenic technology, PSA oxygen technology is known for its low investment, low consumption, low operation-maintenance fee, mild process conditions, simple process flow, high automation, high operation flexibility, short construction duration, and safe performance. Up to now, PSA oxygen technology can replace cryogenic in many circumstances, and the PSA oxygen technology is more economic than cryogenic in running. The main components of air are nitrogen and oxygen, so oxygen can be generated through a selective adsorbent which can separate oxygen from nitrogen in a suitable operation condition. In a pressurized condition, when air flows through adsorption beds with zeolites, nitrogen will be largely adsorbed, while little oxygen will be adsorbed, thus oxygen get enriched. When adsorbent is close to saturation, air will be stopped feeding into the bed,
Read more

Iron and Steel

Image
PIONEER has accumulated extensive experience in VPSA oxygen production technology over the course of 18 years and has served more than 30 large iron and steel companies, including overseas iron and steel companies such as India's JSW and The Philippines Meilian Steel. PIONEER provides advanced gas separation technologies for iron and steel companies to help them save energy and improve efficiency and has an extremely high level of brand awareness in the Chinese iron and steel industry. PIONEER's proprietary technologies serve the iron and steel sector in the following areas: 1. VPSA oxygen production technology ( VPSA-O2 ) A. Oxygen-enriched combustion in ironmaking blast furnaces: PSA oxygen production technology can provide stable and high quality oxygen products for blast furnace ironmaking. B. Oxygen-enriched combustion for EAF steelmaking: oxygen can be obtained using PSA technology. 2. PSA CO purification technology (PSA-CO) A. Recycling blast furnace gas: PIO
Read more

Blast-furnace Oxygen-enriched Iron Manufacturing and Oxygen Generation Project of Wugang

Image
The flow of the  VPSA-O2 device  provided by PIONEER to Wugang Sino-Canada Steel Co., Ltd. is 10,600Nm3/h and the purity is 80%. It is applied to the oxygen-enriched combustion of the Blast Furnace #1 (1,260m3) of Sino-Canada Steel. The blast-furnace oxygen enrichment technology has been commonly recognized by the industry as an effective way to reduce the production cost and elevate the economic benefit. It is analyzed by the expert that when the oxygen enrichment rate of the blast furnace reaches 2.5%, a ton of iron may save 40kg of coke and the annual output of steel may increase by over 90,000 tons. The  VPSA-O2 device  manufactured by the company is energy-saving and flexible in operation that it may assist the user in reducing the cost and strengthen the efficiency.
Read more